Performance and sustainability without compromise
Cooling systems have a decisive influence on your business and the environment around us. Improve your competitiveness and respect the environment with Intelligent Process Cooling Systems.
Performance and Sustainability
Microgel
Reduction of the cooling time of large components.
Increased productivity
Single and double zone temperature control units with incorporated water-cooled chiller and booster pumps.
Microgel is a super-compact mold cooling unit specifically designed for “cycle cooling time reduction”. Combines a water cooled chiller with one or two high flow booster pump temperature controllers with heating elements and a free-cooling valve. Digitally-synchronized with the molding machine, allows for researching and recording the best setting of flow rate and temperature for each zone, optimizing product quality with the minimum cycle cooling time.
Turbogel
Turbogel
Temperature control unit with booster pumps
- Control of the mold temperature synchronized with the process
- Increase in the quality of molded parts
- Reduction of the cycle time up to 20%
High performance temperature control units (single and double zone) with booster pumps.
Turbogel is a mold cooling unit with one or two high flow booster pump temperature controllers, specifically designed for “cycle cooling time reduction”. Digitally-synchronized with the molding machine, allows for researching and recording the best setting of cooling parameters and sequence of heating and/or cooling that optimizes product quality and cycle time.
Thermogel
Molding of components suitable for high operating temperatures.
Constant dimensional stability
Thermogel
Pressurized water Temperature Control Unit, designed for general plastics molding applications up to 140 °C/284 °F.
- Control of the mold temperature synchronized with the process
- High precision: +/- 0.1 °C (+/- 0.2 ˚F) of the set value
- High accessibility for easy maintenance
Pressurized water temperature control units with indirect cooling up to 140 °C (284 ˚F).
Thermogel is a pressurized water temperature controller designed for general plastics molding applications.
Ecodry 3DK
Patented adiabatic cooler: the replacement for evaporative cooling tower
Ecodry 3DK is a centralized closed-circuit adiabatic cooling system designed to replace the old cooling tower technology. Installed outside the system, it removes the heat extracted from the process, achieving:
Large containers
High multi-zone controlled cooling performance.
Reduction of cycle time without waste
Microgel for injection molding
Temperature Control Unit with Chiller
- Control of the mold temperature synchronized with the process
- Cycle time reduction up to 25%
- Intelligent use of energy consumption
- Increase of productivity (up to +33%)
Single and double zone temperature control units with incorporated water-cooled chiller and booster pumps.
Microgel is a super-compact mold cooling unit specifically designed for “cycle cooling time reduction”. Combines a water cooled chiller with one or two high flow booster pump temperature controllers with heating elements and a free-cooling valve. Digitally-synchronized with the molding machine, allows for researching and recording the best setting of flow rate and temperature for each zone, optimizing product quality with the minimum cycle cooling time.
Thin-walled
Minimum cooling time with maximum stability.
Efficient and economical production
Microgel for injection molding
Temperature Control Unit with Chiller
- Control of the mold temperature synchronized with the process
- Cycle time reduction up to 25%
- Intelligent use of energy consumption
- Increase of productivity (up to +33%)
Single and double zone temperature control units with incorporated water-cooled chiller and booster pumps.
Microgel is a super-compact mold cooling unit specifically designed for “cycle cooling time reduction”. Combines a water cooled chiller with one or two high flow booster pump temperature controllers with heating elements and a free-cooling valve. Digitally-synchronized with the molding machine, allows for researching and recording the best setting of flow rate and temperature for each zone, optimizing product quality with the minimum cycle cooling time.
Closures
Special solutions for ultra-rapid cycles in multi-cavity molds.
Productivity at the highest levels
Microgel for packaging
High performance mold cooling unit
- Cooling synchronized with the process
- Cycle time reduction up to 30%
- High energy efficiency (pumps and compressors with inverter)
High performance cooling units with incorported water-cooled chiller and booster pump.
Microgel for packaging is a high-performance ultra-compact mold cooling unit. In one machine, it combines a water-cooled chiller with a high flow and pressure booster pump. Designed specifically for the reduction of cooling time in the packaging sector, in particular for the production of PET preforms, caps and blown products, Microgel is digitally synchronized with the molding machine and allows for searching and storing the best flow and temperature configurations that optimize product quality, with the minimum possible cooling time.
Blown containers
Reduction of the cycle time with no sweating on the molds.
Increase in production performance
Mold Dryer
Industrial air dehumidifier
- Production released from climatic conditions with constant quality
- Reduced maintenance and long life for the molds
- High energy savings compared to traditional systems
Air dehumidifier for mold booths.
Mold Dryer is an air dehumidifier used mainly to prevent the formation of condensation on the surface of the molds, due to the use of low temperature cooling. The air dehumidifiers guarantee optimal working conditions to increase production and reduce waste caused by condensation The system is mainly applied in the packaging sectors:
- Extrusion blow molding
- Injection blow molding
- Injection molding
Aquagel - KTX
Extrusion Kit
Extrusion kits are devices to be combined with RSB series Mi-crogels. They consist of a pump and plate-and-frame heat exchanger. They are designed to cool the extrusion tanks or to separate the process water from the cooling water when the process water is contaminated. Available in three models depending on required cooling capa-city.
Main features
• Galvanized steel support base
• Installed on casters
• Inspectable plate heat exchanger (for easy cleaning)
• Pump suction Y-filter to reduce impeller packing
• Including T_Aux temperature probe for process temperatu-re control via Microgel RSB
Example of an installation
Industrial Chiller
Efficient and sustainable
Air-cooled industrial chillers from 300 to 1430 kW (85.3 to 406.7 tons) with Screw compressors.