Plastrading ancillary technology partners with the technologies you need
We have aligned ourselves with carefully selected ancillary partners who enable us to offer you the state-of-the-art manufacturing process you need to achieve your manufacturing objectives:
Our scope of supply extends to:
Loss-in-weight feeders DVM – In many plastic processing procedures, vibrating channel feeders now play a fundamental role: they weigh and regulate the exact percentage of each component at their entry into the transformation process.
Volumetric Feeders DM – The DM series of volumetric feeders is designed for the automatic and precise dosing of masterbatches, additives, and regrinds.
Gravimetric Feeders DG – The DG series of gravimetric feeders has been designed for the automatic and precise dosing of masterbatches and additives.
Custom loss-in-weight Feeders – Our custom dosing systems are ideal for a wide range of materials, from powders to granules. Each system is equipped with advanced components that ensure precision and reliability.
Gravimetric Feeders DGB – In many plastic processing procedures, gravimetric feeders now play a fundamental role: they weigh and regulate the exact percentage of each component at their entry into the transformation process.
Single-Phase Feeder VLM Series – The VLM single-phase feeders enable the automatic transportation of plastic granules to processing machines, dehumidification hoppers, and dosers.
Single-Phase Venturi Feeder VLV Series – The compressed-air feeder of the VLV series is designed for small throughputs up to 20-30 kg/h.
Three-Phase Feeder PD Series – The PD series suction units, with power ratings from 1.1 to 15 kW, are used in pneumatic conveying for productions up to 3000 kg/h over distances up to 150 m.
Three-Phase Feeder LDM Series – The LDM series receivers, made entirely of stainless steel, and the LDX series with a central body in Pyrex glass, are suitable for use with the PD series three-phase feeders.
Feeder TMM Series – The TMM series feeders are made entirely of stainless steel and are suitable for use in MATRIX 4.0 centralized systems. Eight models are available, ranging from 2 dm³ to 100 dm³.
Powder Feeder VLP Series – The VLP powder feeders represent an intelligent method for the pneumatic transportation of plastic powders. They can also be used for transporting food, pharmaceutical, and chemical products, ensuring high hygienic standards.
Centralized Systems Matrix – The Matrix2 control system allows management of up to 8 blowers and 56 receivers. It controls material decoding, bypass valves, and centralized filter cleaning.
Centraline automatiche serie AMMP – Le centraline automatiche della serie AMMP rappresentano la soluzione ideale per la distribuzione
dei materiali plastici all’interno degli stabilimenti.
Dryers DAC Series – The DAC series small dehumidifiers are the ideal solution for dehumidifying hygroscopic polymers for small productions.
Dryers DW Series – The DW series dehumidifiers, equipped with rotor technology, offer high-level performance in dehumidification and ensure maximum efficiency and versatility in medium-scale productions.
Dryers DWC Series – The DWC compact models utilize rotor technology, offering flow rates from 40 to 300 m³/h and allowing for the management of hopper and processing machine loading.
Dryers D Series – The D Series dehumidifiers are equipped with TWIN TOWER technology, with process air flow rates from 80 to 150 m³/h and a dew point value down to -50 °C, meeting any production need.
Dryers DP Series – The DP Series dehumidifiers are machines designed and built to remove moisture from the granules of hygroscopic thermoplastic materials.
DWH-Mini Series Dehumidifiers – The DWH series dehumidifiers, equipped with rotor technology, deliver high-level performance in the field of dehumidification and ensure maximum efficiency and operational versatility.
DWH Series Dehumidifiers – The DWH/C series dehumidifiers, equipped with rotor technology, deliver high-level performance in dehumidification and ensure maximum efficiency and operational versatility.
Mixers M Series – The ‘on-machine’ mixers of the M series are suitable for mixing plastic granule materials such as masterbatch, additives, and regrinds.
Mixers MVP Series – The vertical mixers of the MVP series are suitable for mixing large quantities of plastic granules. The externally painted steel construction is robust, and the unit is supported on the ground by 4 legs.
Crystallizers CRN series – The crystallizers of the CRN series can process PET in amorphous granules and regrinded flakes from bottles, etc.
Crystallizers FB Series – The crystallizers of the FB series are based on the principle of the vibrating fluidized bed with material advancement on a perforated plane suspended by the airflow and vibrations of the plane.
Low-speed granulators G series – The new series of low-speed granulators from the G series finds ideal application in injection molding and blow molding.
Low-speed granulators GS series – The low-speed granulators of the GS series are designed for the recovery of high-hardness thermoplastic polymers: PA, ABS, PC, PBT, POM, etc.
Easy Way – Plastic Systems’ EASYWAY represents a revolutionary innovation in the field of industrial management systems, being a patented software that perfectly embodies the principles of Industry 4.0.
MJ6-i Dehumidifying Dryer Dehumidifying Dryer uses a honeycomb rotor. There is no risk of the desiccant powdering, and it is not easily affected by the temperature or humidity of the outside air, so it always maintains a stable drying environment.
Dehumidifying dryer (Optical) DMD4 – A dehumidifying dryer and a vacuum loader that supplies stable dew point dry air for optical molding combined in a single unit. The initial performance is kept for a long period without replacing the adsorbent material in the honeycomb unit.
Dehumidifying Unit DMZ2 – DMZ2 supplies dry air with a stable low dew point of -40 °C. The initial performance is kept for a long period without replacing the adsorbent material in the honeycomb unit.
Dew condensation prevention machine SGP – Dew condensation prevention machine SGP is a device to prevent dew condensation on the mold by dehumidifying the air around the mold. Contributes to a high cycle of molding where the set temperature could not be lowered to avoid dew condensation.
Thermal Fin Vacuum Dryer DPD3.1 – DPD3.1 is Thermal Fin Vacuum Dryer. The reduced pressure space allows for short drying times at low temperatures. It prevents yellowing of products caused by oxidation, and reduces the maintenance frequency of the mold surface by removing gases.
Compact Thermal Conduction Dryer PMD Plus Compact Dryer
The PMD is a highly energy-efficient heat-transfer dryer for material usage of 1 kg/h or less. The use of conduction and heat-transfer drying reduces exhaust during drying, and the dual hopper system minimizes exhaust heat and contributes to the creation of a clean factory environment.
Hot Air Dryer MGD Matsui Global Dryer – The MGD model is a portable hot air dryer and vacuum loader on a single frame, that is intended for easy maintenance.
Hot Air Dryer HD2 – Hopper Dryer HD2 is an aeration dryer that dries resin with hot air. High-pressure hot air rises through the gaps in the resin, enabling uniform drying in a short period of time.
Tray dryer PO The tray dryer Hakokan PO is a box tray dryer with batch type 10 to 30 containers (bats). You can easily dry a wide variety of products in small quantities.
PET Continuous Crystallization Dryer HD-AD Continuous crystallization drying device
JL4
Vacuum Loader (Jet loader)
ST
Pneumatic Conveyor (Stella)
APH
Aero Power Hopper (Filterless Type)
Jet Clone
MVH
Suction Hopper
SJC
Slide Gate Type Suction Hopper
CJC
Cylinder Type Suction Hopper
FPD
Dust Remover
ARV
Aero Remover
DP
Suction Pressure Sensor Unit
KI Blow
MC
Magic Catch
–
Rotary Valve
–
Material Branch Valve
MSD
Piping Switching Unit
PD
Material cutting unit (push damper)
MEC
Easy coupling
-
CU
Connection Unit
MPJ
Matsui Pipe Joint
–
Suction Nozzle
-
KKB
Hose Type Suction Box
SKB
Nozzle Type Suction Box
UH
Universal Header
–
Magnet separator
–
T-type Feeding Pipe (for Jet Clone)
–
Double Cone
PLP
Compressed Air Loader
FD
Pneumatic Conveyor
SFD-HT
Pneumatic Conveyor
MC6
Mold temperature controller Kanaon
MC6-SP
Kanaon mold temperature controller
MC5-HH
Mold temperature controller (high temperature specification) Kanaon
MCLX/HX
Mold temperature controller (large flow rate) Kanaon
MC-5
Kanaon mold temperature controller
Heat&Cool
Mold temperature control technology
MC5
Kanaon mold temperature controller
MC
Kanaon mold temperature controller
MC-HH
Mold temperature controller (high temperature specification) Kanaon
MCA
media temperature controller
MCAX
media temperature controller
MCJ-AA
media temperature controller
MIC
Air-cooled material outlet cooler
MCX2
Water-cooled mold cooling and temperature controller Rayion
MCC5-i
Water-cooled mold cooling machine
MCC5-N
Mold Cooling Machine
MCC5
Mold Cooling Machine
MCCA3 / MCCA3-N
Mold cooling machine (air-cooled type)
ecobrid
Air-cooled sealed water cooling system
preCLEAR
Ion exchange water softener with filter
SMGL3-G1
Low-speed crusher
SMGL3-G3
Low-speed crusher
MGL2
Low-speed crusher
SMGL-300J
Low-speed crusher
MC-5
Kanaon mold temperature controller
BM-SL
High-speed crusher
TamaGON
Mold insulation system
SDC
Mold Changer
–
3D water pipe mold insert
SMGL-300J
Low-speed crusher
MAG
Mold gas suction device
i3 MICRO CLEAN 2
Dry Ice Blast Cleaning Equipment
–
3D Water Tube Sprue Bush
ZiRKON
Insulating Sprue Bush
Raptor22ST2
Engineering plastic recycling pelletizer
MuCell®
Physical foam molding
TA
Material Tank
T
Material Tank
–
Twin Tank
MS
silo
–
Barrow
Receiving facilities
Flow diagram
iFLOW Manifold Technology
Brazed Heater Technology
MasterSHIELD Leak Protection Technology
APS (Adaptive Process System) Technology
SUMMIT-SERIES
MASTER-SERIES
ACCU-LINE
VELOCITYLS
SPRINT
THINPAK-SERIES
FUSION-SERIES G2
DURA+
ACCU-LINE FM
AXIOM
LSR COLD DECK
PET-SERIES
MELT-CUBE EVO
MELT-CUBE
MELT-DISK
TIT-EDGE
E-MULTI
E-MULTI LSR
HOT RUNNER SYSTEM
CONNECT PACKAGE
KLEAR CAN
APPLICATIONS
MOLD MONITORING SYSTEM